Yes and it is usually not difficult to adjust. Most likely one of two problems is occurring; the door is either traveling too far causing a binding situation or the down force is set too light. Both of these conditions can usually be corrected by making small...
One thing to remember is that these wide doors are heavy and require several components to work in tandem to ensure proper and smooth operation. In general when the opener begins to pull the door up it puts a tremendous amount of force on the top center panel. Usually...
I often see large accumulations of frost under the garage soffit where the heater is vented. It is important that the warm moist air that is coming out of the heater vent is not entering the attic space through the soffit. If the vent is too short, the warm air rises...
That depends on your conditions. I always say don’t fix it if it isn’t broken. Normally I would say the filter should be changed every two to three months. The exception is if you are renovating or have pets and carpets etc. Sometimes the filter needs...
This problem sounds like a flame sensor. Most modern furnaces have several safety sensors and switches. What you describe sounds like a flame sensor. Here is how it works. When the burner starts up the gas valve has a timer that was a few seconds for a circuit to...
Recent Comments